Version 7.75 - 25th February 2009 Added the indicators on the main panel that report the area(-baseline), max-baseline and min-baseline between two cursors. The baseline is the position of the horizontal hair of the leftmost cursor. --FN ---------------------------------------------------------------- Version 7.71 - 14th August 2008 Fixed a minor bug in setting the channel labels. --FN ---------------------------------------------------------------- Version 7.70 - 24th March 2008 Added the threshold times to peak detect analysis. Also the peak detect save button now saves to the same directory as the data directory. --FN ---------------------------------------------------------------- Version 7.69 - 14th March 2008 Fixed the filter noise produced at the beginning of trace. --FN ---------------------------------------------------------------- Version 7.68 - 13th March 2008 Added the shortcuts ctl-shift-Y for saving DCLAMP params and ctl-shift-S for saving ASCII-checked-ALL --FN ---------------------------------------------------------------- Version 7.67 - 23rd February 2008 Minor change in peak detect. --FN ---------------------------------------------------------------- Version 7.66 - 22nd January 2008 Added delay between channels in peak detect. Added option of not plotting the average values in peak detect --FN ---------------------------------------------------------------- Version 7.65 - 17th January 2008 Debugged peak detect. Added locks to cursors in peak detect. --FN ---------------------------------------------------------------- Version 7.62 - 18th November 2007 Major rewrite of peak detect. This version is temporary but functional. --FN ---------------------------------------------------------------- Version 7.61 - 12th November 2007 Minor changes in peak detect. Now only peaks after the cursor are found. Also, ctl-shift-d opens the peak detect window. --FN ---------------------------------------------------------------- Version 7.60 - 12th November 2007 Minor changes in filtering. Two control-f's now LP-filters the active channel at 50Hz. --FN ---------------------------------------------------------------- Version 7.57 - 22nd June 2007 Fixed write to file for spike/burst detection. --FN ---------------------------------------------------------------- Version 7.56 - 20th December 2004 Fixed 2 more bugs with the damned burst detection. Moved all burst detection files to burst.c. --FN ---------------------------------------------------------------- Version 7.55 - 17th December 2004 Added channel scaling. --FN ---------------------------------------------------------------- Version 7.54 - 11th September 2004 Fixed a bug with extract waveform period. --FN ---------------------------------------------------------------- Version 7.53 - 21st July 2004 Added the option of changing the trace colors. --FN ---------------------------------------------------------------- Version 7.52 - 20th July 2004 Added the option of moving traces up and down. Known bug: it also moves hidden channels. --FN ---------------------------------------------------------------- Version 7.51 - 13th May 2004 Corrected a mistake in stdev of burst and interburst in the spike detection panel. --FN ---------------------------------------------------------------- Version 7.50 - 30th Apr 2004 Added the number of spikes and bursts in spike detection. --FN ---------------------------------------------------------------- Version 7.49 - 30th Mar 2004 Added the number of spikes per burst in burst detection. --FN ---------------------------------------------------------------- Version 7.48 - 18th Oct 2003 Fixed two bugs in spike and burst detection. --FN ---------------------------------------------------------------- Version 7.47 - 20th Aug 2003 In Format and Print, seconds per window option is added. Those many seconds will be shown in each window. ---------------------------------------------------------------- Version 7.46 - 19th Aug 2003 Extract waveform shows average of waveforms specified. By default, it will pick up only 1st waveform cycle. If specified other than 1 then it takes average of that many waveform cycles. ---------------------------------------------------------------- Version 7.45 - 11th Aug 2003 Save wavform also saves amplitude and absolute minimum value in waveform file. ---------------------------------------------------------------- Version 7.44 - 5th Aug 2003 Bugfix: Conversion of scp files to abf file was not working because of incorrect header format. Board gain was not considered while saving as abf file. For abf file version above and equal to 1.8, comment is stored at different location in header. This version compatibility is also fixed. ---------------------------------------------------------------- Version 7.43 - 1st July 2003 Bugfix: For abf files, save scp option was fixed. ---------------------------------------------------------------- Version 7.42 - 23rd June 2003 File with data more than specified in the header is also opened and displayed. ---------------------------------------------------------------- Version 7.41 - 13th June 2003 Cursors are obtained by right clicking on graph instead of from menu. Amplitude of graphs can be manually adjusted using numeric controls. ------------------------------------------------------------------ Version 7.40 - 12th June 2003 In Print and format option, fit to screen option is added. Also print screen shows start time at the bottom, allows resetting comments. The printing of all files also stop as soon as the print display screen is closed. ------------------------------------------------------------------ Version 7.39 - 20th may 2003 Bugfix: Save Average in extract spike option was not applying scaling factor for abf files. ------------------------------------------------------------------------- Version 7.38 - 14th may 2003 Bugfix: Save Average in extract spike option was not applying board gains before saving. ------------------------------------------------------------------------- Version 7.37 - 29th april 2003 Zoom out and Area under the curve options are added. Also zoom in shows a area selected before zoomin in using PlotRectangle. ------------------------------------------------------------------------- Version 7.36 - 18th april 2003 User interface was completed changed. ------------------------------------------------------------------------- Version 7.34 - 2nd april 2003 Bugfix in format & print option for Auto Scale. ------------------------------------------------------------------------- Version 7.33 - 31st March 2003 Abf file compatibility. Readscope can open abf file. ------------------------------------------------------------------------- Version 7.32 - 22nd March 2003 Format and Print option added. this option formats each channel in separate window. It also provides various print options such as Print all, Print File. ------------------------------------------------------------------------- Version 7.31 - 10th March 2003 Fourier transform option is added. ------------------------------------------------------------------------- Version 7.30 - Dec 26th 2002 Bugfix: Open Next file and last file options were not working if files were on CD. ------------------------------------------------------------------------------------------ Version 7.29 - Dec 22rd 2002 Read scope was changed in order to make it compatible to Phase Response files. Data can be saved using Phase Response. These files can be opened by readscope. Program code for Phase Response is 2. The strategy is similar to Dynamic Clamp. ------------------------------------------------------------------------------------------ Version 7.28 - unknown Dynamic clamp can have more than 8 channels because of calculated channels along with 8 acquired one, this version was made complaint for more than 8 channels. ------------------------------------------------------------------------------------------ Version 7.27 - Aug 24th 2002 Read scope was changed in order to make it compatible to dynamic clamp files. Data can be saved using dynamic clamp. These files can be opened by readscope. ------------------------------------------------------------------------------------------ Version 7.26 - march 1st 2002 Bufix: For scp files recorded by scope version 732, scp save option was not working. It was fixed by correcting writeHeader function. ------------------------------------------------------------------------------------------ Version 7.25 - Feb 22nd 2002 1) For extract Spike, clear button is added. 2) Number of bursts are shown alongwith other details. 3) The Spikes panel and spike data is cleared whenever next file is opened. 3) Save data do not overrite the file. If file alerady exists then it creates new file with a count at the end of file name. 4) Bugfix: The line from start of a burst to start of next burst is corrected. ------------------------------------------------------------------------------------------ Version 7.24 - Feb 22nd 2002 save - scp - range append option is added. This option append the selected range of opened file to other selected scp file. ------------------------------------------------------------------------------------------ Version 7.23 - Feb 21st 2002 Bugfix: The problem with save-scp-range was fixed. The writeHeader was changed. The Flags and Header_len arrays were initialized whenever you open a file. ------------------------------------------------------------------------------------------ Version 7.22 Modified by Niranjan on Feb 12th 2002 1) Get baseline feature is added which works alongwith the peak finidng mechanisam. After finding peaks, details such as tim of peak, peak value, if it is min peak or max peak, difference between peak value and set baseline and then difference between peak value and previous peak value is displayed in text box on peak panel. Reset button is added to reset graph and number of peaks. Get baseline button copies cursor value to baseline text box. 2) Cursor colors are set to magenta and black. This is set immediately after number of cursors are changed in cursor option. ------------------------------------------------------------------------------------------ Version 7.21 Modified by Niranjan on Feb 12th 2002 For ascii save, precision of values were 2 decimals. It was changed to 5 decimal places for better accuracy. ------------------------------------------------------------------------------------------ Version 7.20 Modified by Niranjan on Feb 11th 2002 Bugfix: 1) For scope version 7.33 and before, there was no units stored in the header. This was not handled in readscope. Hence 7.33 version files were giving problem. It was fixed. Version is checked before calling Units function. 2) After reading sepcifications, instead of rewinding the file and using dummy for offsetting file pointer to data, fseek function is used. 3) After implementing point 1) in last version, bug was observed if the file has only one channel. It was fixed by setting active channel to zero the current active channel is less greater than total number of channels. ------------------------------------------------------------------------------------------ Version 7.19 Modified by Niranjan on Feb 11th 2002 1) When only one of the channel other than zero is selected then when next or previous file is selected, active channel should be the one selected for previous one. 2) With only one cursor, if a figure is enterd in delta time text box, then mint of window is moved to the absolute value minus the enterd value. This is done to enable keeping fixed amount of time at the start of window. ------------------------------------------------------------------------------------------ Version 7.18 Modified by Niranjan on Feb 5th 2002 1) Cursor Lock and Choice on number of cursors is added. 2) Save scp all and range was not working perfectly. Bug fix was done. The problem was with header offset. 3) Detect Peak option is added. The program finds minimum and maximum peaks around the set cursor value. ------------------------------------------------------------------------------------------ Version 7.17 Modified by Niranjan on Jan 30th 2002 Save scp all and range options in the menu were not version complaint. These options are made to work for any version of scope. ------------------------------------------------------------------------------------------ Version 7.16 Bugfix by Niranjan on Jan 30th 2002 This is to fix the bug occured in Scope 7.34. In Scope 7.34, the scale factors were stored as short instead as int. To fix this, scale factor is made zero if the version is 7.34. ------------------------------------------------------------------------------------------